VERTICAL BALER

Baler X50 HD Galvanized

The galvanized version of the X50 HD is specially designed for wet and harsh environments.
Add to your quote
X50 HD GalvanizedX50 Galvanized
X50 Galvanized
Popular options
Gain remote access to your baler with our intelligent fleet monitoring system, BRA-IN. You see balers full, service status, number of collections etc. and optimize your Total Cost of Ownership.
BRA-IN lets you monitor your balers intelligently
Add to quote
Use a flap door to avoid waste back-run when you fill cans or PET bottles into your baler. Galvanization makes it suitable for wet waste or waste with residual liquids.
Handle bottles and cans efficiently with a galvanized flap door
Add to quote
Compact and drain your waste at once. Equip your baler with an efficient draining system. Dripping is prevented with additional door sealing.
Lead liquids out of your baler with a draining system
Add to quote
The auto lock lets you decide who can use your baler. Everyone can load it, but it requires a PIN code or a personal key tag to run press cycles.
Block access to baler controls with auto lock
Add to quote
Add to quote
Quote details
X50 HD GalvanizedX50 Galvanized
X50 Galvanized

    Wypełnij swoje dane poniżej, a my się z Tobą skontaktujemy

    Overview
    How to operate
    Safety
    Technical specifications
     

    Withstands severe demands from environment

    When demands on the machine are severe enough to demand a special surface treatment, the galvanized finish is suitable for all applications without hygienic requirements for stainless steel.

    X50 HD Galvanized – Baler for harsh wet environments:

    • ASTM A123/A123M galvanized
    • Suitable for all recyclable waste types
    • Handles aluminum cans, PET bottles, and plastic jugs
    • Available with drain for residual liquids
    How does the X50 HD Galvanized baler work?

    Time-saving and easy waste handling

    1. Load your recyclables into vertical baler.
    2. A full-bale light tells you when the baler is full.
    3. Tie off and eject the compacted bale.
    4. Remove the bale with a pallet jack for storage untill collection.
    The X50 HD Galvanized baler is safe and easy to operate
    Our equipment has the highest level of safety – don’t settle with less!
    Bale weight cardboard (lbs)750-1,000
    Bale weight plastic foil (lbs)850-1,200
    Press force (lbs)110,000
    Power supply208/230/480V 3-phase 60Hz
    Motor (HP)7.5
    Noise Level (dB)62-64
    Cycle time avg. (sec)18
    Dimensions WxDxH (inch)78 x 54 x 100
    Weight (lbs)5,370
    Feed opening WxH (inch)43 x 24
    Load height (inch)48
    Chamber height (inch)67
    Stroke (inch)48
    Number of ties4
    Type of tyingTwine / Steel wire
    Full bale lightYes
    Bale ejectAutomatic
    Waste volumeLarge
    Waste types
    Cardboard
    Plastic foil
    Paper
    PET Bottles
    Alu cans
    Hard plastic
    Liquid
    EPS
    Tin cans
    Waste Volume
    Large
    FEED OPENING
    43 x 24 Inches
    BALE SIZE
    48 x 30 x 48 Inches
    PRESS FORCE
    110,000 lbs
    BALE WEIGHT
    Cardboard:750-1,000
    Plast: 850-1,200
    FAQ
    X50 HD Galvanized X50 HD Galvanized
    Most common questions and answers
    Which door type is the most suitable when I need to compact PET bottles?

    Our Flap Door is specially developed for handling PET bottles.

    The Flap Door works just like a chute for the bottles and makes it easy to throw bottles directly into the baler either separately or in full sacks.

    How large are the bales made by a vertical baler?

    The weight and size of a finished bale depends on the size of the machine and the waste type.

    Our small footprint vertical balers, like the B3 and B4 models, make smaller easy-to-handle bales. Finished bales made in one of these machines weigh between 66 – 220 lbs. for cardboard and 88 – 286 lbs. for plastic. Using a bale cart, the bales can be easily moved around your facility for storage or pickup.

    Our medium size balers make a heavier bale that can be ejected and stored on a standard pallet. Finished bales weigh between 440 -772 lbs. for cardboard and 550 – 992 lbs. for plastic. Using a pallet jack or forklift, the bales can be easily transported.

    Our large balers, like the B6030 and X30 HD models, make bales that are as heavy as Large Size Balers compact bales as heavy as 825 – 1,200 lbs. for cardboard and 880 – 1,300 lbs. for plastic. View the finished bale size dimensions of our balers under Product Specifications.

    Can I compact PET bottles?

    Yes, it is possible to bale PET bottles. However, before compacting, the bottles need to be perforated or the lids taken completely off. If not, the trapped air inside of the bottles will cause a looser, less compact bale. PET is one of the most abundant materials. It is found in soda bottles, water bottles, drinking cups, and food containers.

    PET bottles can be baled in our X-series model balers. For a tighter and more stable bale, we recommend placing a layer of cardboard on both the top and bottom of the finished bale.

    Can I compact cans?

    Yes, you can bale cans and other light metal waste (ie. aluminum) in a baler.

    To bale cans, you will need a machine with a high press force that will compact the material during the first press cycle. With cross cylinders and long cylinder strokes, our X-series balers are designed for compacting cans and other heavy duty materials.

    For a tight and stable bale, we suggest layering a piece of cardboard on both the top and bottom of the finished bale. Another option is to cover the finished bale in shrink wrap.

    Do you know who can pick up my bales?
    Usually, your regular waste collector can handle the bales. Otherwise, we recommend contacting your local recycler who may be able to help you.
    Where should I install my machine?

    The best place to install your baler depends on your internal work procedure and waste flow. We suggest placing the baler near the waste source to allow for more efficient waste handling.

    We are happy to help you find the best location for your machine.

    Is a baler safe to operate?

    Yes, Bramidan balers are safe to operate. Our vertical balers meet the highest safety standards. All of our equipment is accredited by ANSI Z245.5 and OSHA Safety Standards. All control panels are UL and CUL approved.

    To protect users, all moving parts are placed inside the machine. In order to eject a finished bale, the operator must stand safely next to the machine and use a two-handed ejection system.

    How does tying the bale work?

    All of our balers have a special pre-load system, which makes it both safe and easy to tie off a carboard or plastic bale. Since the wire and strapping is loaded prior to baling, there is no need to go behind the baler.

    1. While the baler is empty, pull the strapping or wire along the channels inside the chamber and secure with a loop at the front of the machine.
    2. Baler is ready to use – toss in material and make a cardboard or plastic bale.
    3. When baler is full, pull the strapping or wire from the back of the chamber to the front. Tie with the loops you made earlier.
    4. The machine has a knife attached to easily cut strapping.
    5. Eject the finished bale.
    Is a baler noisy?
    Our vertical balers are very quiet, in fact, they are the quietest on the market due to the state-of-the-art power packs. The noise level on our machines is equivalent to that of a computer printer. Since they are so low, our machines can be placed in a variety of work spaces without causing a disruption.
    Do you have a compaction solution for recyclables that contain residual liquid?

    Yes, we supply a draining add-on for select models. With this solution, you will be able to bale waste materials that contain liquids, such as aluminum cans and PET bottles.

    To prevent splashing, our draining system also includes a seal for the bottom door. Learn more about the draining add-on here.

    We also offer a galvanized model for customers who are interested in compacting materials with liquid residue, which will prolong the life of your baler.

    Did you find an answer to your questions? If not visit our FAQ universe.
    FAQ
    Product options
    Customize your machine with the perfect product options for your needs
    VERTICAL BALER X50 Galvanized
    BRA-IN lets you monitor your balers intelligently
    Gain remote access to your baler with our intelligent fleet monitoring system, BRA-IN. You see balers full, service status, number of collections etc. and optimize your Total Cost of Ownership.
    Handle bottles and cans efficiently with a galvanized flap door
    Use a flap door to avoid waste back-run when you fill cans or PET bottles into your baler. Galvanization makes it suitable for wet waste or waste with residual liquids.
    Lead liquids out of your baler with a draining system
    Compact and drain your waste at once. Equip your baler with an efficient draining system. Dripping is prevented with additional door sealing.
    Block access to baler controls with auto lock
    The auto lock lets you decide who can use your baler. Everyone can load it, but it requires a PIN code or a personal key tag to run press cycles.
    One of the quietest machines on the market
     
    30dB
    50dB
    75dB
    100dB
    160dB
    30 db
    50 db
    62-64
    75 db
    100 db
    160 db
    Whisper
    Fridge
    X50 Galvanized
    Other Balers
    Cars on motorway
    Jet engine
     
     

    Monitor and analyze your equipment..

    Make the most of your equipment with our intelligent monitoring solution. We call it BRA-IN, Bramidan Intelligence. With BRA-IN you can make faster and better decisions, reducing your costs of operation while minimizing your impact on the environment.
    In our business BRA-IN is short for Bramidan Intelligence, and a collective name for our special developed IOT system. This links all connected compaction equipment with IT systems, providing you with a 360 degree view of your equipment minimizing direct and indirect waste handling costs over time.

    Combine our BRA-IN services to fit your needs

    When your equipment is connected via a BRA-IN branded product, you can access valuable data, helping you to monitor and optimize your waste handling. Most data can be exported easily to Excel for further analysis, but for more advanced options for data analysis feel free to contact us.

    BRA-IN Optimize

    Lirum larum ipsum dfdopw dkopweug slpwtgyg slpepfhyg slpwfh dpwhf, slpwy dlwxmwske sleigysw slpw.

    BRA-IN ECOSystem

    Lirum larum ipsum dpesoe dlpweu, smvspe dlweyhgvi sklwpeyg vnoqfh dlwywez dkleuoy dwiog.

    BRA-IN Weight

    Lirum larum ipsum dopedw cmoeiur, skpwyhc dlpweyf dklweh sdkopw dmnwie djkwey. sdwotyd xeoiusd dkjpweg sjkwphdf.

    BRA-IN Webportal

    Lirum larum ipsum dksopwe ldpe. dfdepsle dlpwe dklepde, spelrfow dkowhssd, skopwe dkjliwa lpews.

    BRA-IN App

    Irum larum idoluop, predper perdfiop cnfedoep. fklerdpoe dfleopsf ldfoeps jesesdf.

    BRA-IN Modem

    Lirum larum ipsum pderlos, dkopesdpd kdopwet dlowebz dlppqw ldpwe dkowpls, dkopw ldpwifq.

    BRA-IN Link

    Lirum larum ipsum skpwdo ldpwd, ldpwoq dlpwafg ldpwiow ldpwjdi skoezcm dlpwud. dlpwff dklwiog slpweg slopwf.